昆山達亮塑膠模具有限公司

Service phones:13962423309

Contact us

Bai Shui Chao           

Email: dl-bsc@dlsjmj.com 

Telephones:  13962423309 


Mark Yen              
Email: dl-mark@dlsjmj.com 
Telephones:  17312472090 


TEL:0512-57170368

FAX:0512-57170328

HTTP://www.0511ym.com

Add: No.218 South Yucheng  Road Kunshan City Jiangsu Province China.


Industry news locations:Index  >  News  >  Industry news

  1. Key points for new mold test of plastic moldRelease date:2020-06-12 Click number:7765

    1. Mold test steps and actions A. Before mold test, check whether the mold is assembled and whether the raw materials are dried B. Before mold change, spray antirust agent into the mold during production, change the mold, return it and fill in the r

  2. What are the requirements of injection mold design?Release date:2020-06-01 Click number:7346

    1. Analyze the structure and technical requirements of plastic parts. The structure of the plastic part determines the complexity of the injection mold structure, and the technical requirements of the plastic part (dimensional accuracy, surface roug

  3. What are the common machining equipment for plastic mold?Release date:2020-06-01 Click number:8380

    The common machining equipment of plastic mould includes lathe, grinder, EDM, wire cutter, milling machine and numerical control milling machine. Lathe Lathe is a kind of machine which mainly uses turning tools to turn the rotating workpiece. The la

  4. The six requirements of plastic mold purchase should not be ignoredRelease date:2020-05-20 Click number:6022

    1. Many resins and additives with high corrosion resistance have corrosion effect on the surface of the cavity, which makes the metal on the surface of the cavity dissolve and peel off, the surface condition become bad and the quality of the plastic

  5. Influencing factors of plastic mold makingRelease date:2020-05-12 Click number:6703

    Influencing factors of plastic mold making: 1. Parting surface When the die is closed, the concave die and the convex die cooperate with each other. 2. Frame They are sliding block, inclined top, straight top block and so on. 3. Mold accuracy Includ

  6. What are the requirements of injection mold design?Release date:2020-05-08 Click number:6791

    1. Analyze the structure and technical requirements of plastic parts. The structure of the plastic part determines the complexity of the injection mold structure, and the technical requirements of the plastic part (dimensional accuracy, surface roug

Message

昆山達亮塑膠模具有限公司

13962423309

榴莲视频污片_榴莲APP下载_榴莲视频在线观看污_榴莲视频APP污在线观看